Ready-to-wear
Dura Skin
A 0.12 mm injected skin system reinforced with clear gauze, built for 4–6 months of dependable daily wear.
- Skin construction
- Color-match guidance
- Fitting explained
$299.00
01Make it yours
Size & color guideColor family
Tracked worldwide shipping (DHL/UPS)
14-day returns on unworn systems · 30-day defect warranty
Encrypted, secure checkout
Key features
• Bonded clear gauze layer — the gauze is sealed inside the poly, adding structural strength and shape retention without visible bulk, so the base holds its form and degrades gradually rather than failing suddenly.
• Fully injected, knotless construction — every strand is injected directly into the skin, leaving the underside glass-smooth and the top free of knot dots from any angle.
• 0.12 mm base — the thickest skin we carry — resists stretching, tearing, and edge curling far better than thinner poly, which is what gives it the longest service life in the skin category.
• #1 scalloped front edge — an irregular, saw-tooth hairline cut that mimics how hair density naturally thins toward the forehead, rather than a hard straight line.
• Fast, residue-free cleanup — the non-porous surface wipes clean of adhesive in minutes and never soaks up oils or styling product.
• Fully injected, knotless construction — every strand is injected directly into the skin, leaving the underside glass-smooth and the top free of knot dots from any angle.
• 0.12 mm base — the thickest skin we carry — resists stretching, tearing, and edge curling far better than thinner poly, which is what gives it the longest service life in the skin category.
• #1 scalloped front edge — an irregular, saw-tooth hairline cut that mimics how hair density naturally thins toward the forehead, rather than a hard straight line.
• Fast, residue-free cleanup — the non-porous surface wipes clean of adhesive in minutes and never soaks up oils or styling product.
Care guide
• Bond with quality tape or liquid adhesive on the smooth skin surface
• Wipe the perimeter clean during routine maintenance
• Wash on a sensible schedule with sulfate-free products
• Never comb when wet to preserve fiber integrity
• Rotate 3–4 units per year for consistent styling and service
• Wipe the perimeter clean during routine maintenance
• Wash on a sensible schedule with sulfate-free products
• Never comb when wet to preserve fiber integrity
• Rotate 3–4 units per year for consistent styling and service
Details
The Dura Skin is the skin system you choose when replacement cycles matter more than shaving off the last fraction of a millimetre. Its 0.12 mm transparent polyurethane base is reinforced with a bonded layer of clear gauze, so the base holds its shape, resists stretching, and wears gradually instead of failing suddenly — a poly base built for fewer replacement cycles.
Best for: active wearers, frequent travellers, and anyone who wants a dependable daily workhorse with fewer service appointments.
Construction: hair is injected directly into the 0.12 mm base, so the underside stays completely smooth and no knot dots show from above. The system ships as an 8 × 10 in trim-to-fit base with 100% Indian human hair at 5 in (12.7 cm), freestyle direction, and a 110% light/medium-to-medium density that covers convincingly without bulk.
Hairline: the #1 scalloped front edge breaks the hairline into an irregular, organic line rather than a straight cut, and because the roots are injected — not knotted — the part and crown read as scalp. No knots are bleached, which preserves fibre integrity at the front.
Durability: expect 4–6 months of wear, with most wearers rotating 3 to 4 units a year. The gauze layer keeps shedding minimal and density consistent from first wear to last.
Maintenance: wash on a sensible schedule with sulfate-free products. The smooth, non-porous base releases adhesive residue in minutes and doesn't absorb oils. Never comb when wet; bond with tape or liquid adhesive — clips are not suitable for a skin base.
Not ideal for: maximum close-range invisibility. If that's your priority, the Micro Skin (0.06 mm) reads smoother against the scalp, and the Thin Skin LF adds a Swiss lace hairline.
Care
waSh on a sensible schedule with sulfate-free products. The smooth, non-porous base releases adhesive residue in minutes and doesn't absorb oils. Never comb when wet; bond with tape or liquid adhesive — clips are not suitable for a skin base.
Dura Skin
- 01 · Consultation Free 20-minute consult with a specialist
- 02 · Support 8am–6pm · Lifelong support + 40+ partner salons
Specification
What this system is made of.
- Base construction Hair injected into a 0.12 mm base
- Base size 8 × 10 in, trim-to-fit
- Density 110% light/medium to medium
- Hair type 100% Indian human hair
- Hair length 5 in (12.7 cm)
- Colour 18 hair colours
- Attachment Tape or liquid adhesive (not clips)
- Lifespan 4–6 months
First wear
Your first wear, in three steps.
-
Step 1: Match before ordering.
Measure the coverage area and compare a real color sample in daylight.
-
Step 2: Inspect before altering.
Check color, base and hair before cutting the base or applying adhesive.
-
Step 3: Fit, cut and maintain.
Have a qualified stylist fit the base, blend the cut and show you a care routine.
Construction
Built to outlast thinner skins.
A bonded layer of clear gauze inside the 0.12 mm poly base adds strength without visible bulk, so the base holds its shape month after month. Where thinner skins trade lifespan for invisibility, the Dura Skin is tuned the other way — maximum service life from a poly base, with realism that holds up in normal lighting. Because each strand is injected straight into the base, the underside bonds completely flat and the top shows no knot dots at all. The scalloped front edge softens the hairline into an irregular, natural line, and shedding stays gradual — so density looks consistent from first wear to last.
Base construction
Hair injected into a 0.12 mm base
Density
110% light/medium to medium
Lifespan
4–6 months
Hair length
5 in (12.7 cm)
Reviews
What clients say after wearing it.
4.7
★★★★★
7 reviewsWhat is the Dura Skin and who is it for?
The Dura Skin is a 0.12 mm polyurethane skin hair system reinforced with clear gauze — the most durable skin base we make. It suits wearers who want a scalp-like finish with a longer service life, active lifestyles included. If maximum undetectability matters more to you than longevity, look at the Micro Skin or Nano Skin instead.
What are the Dura Skin's base size, density, and hair specs?
The base is 8 × 10 in and trims to fit your template. Hair is Indian human hair at 110% density (light/medium to medium), 5 in long so your stylist can cut it in. The front edge is a #1 scalloped contour with injected, unbleached roots for an organic-looking hairline.
How long does the Dura Skin last and how do I care for it?
Expect 4–6 months of daily wear — the longest lifespan in our skin range, thanks to the gauze-reinforced 0.12 mm base. Wash on a sensible schedule with sulfate-free products, never comb it wet, and air-dry or use low heat. The non-porous base releases adhesive residue in minutes at each rebond.
How is the Dura Skin attached and removed?
Bond it with tape or liquid adhesive — clips are not suitable for a skin base. Clean and dry your scalp, apply the adhesive, and press the base down along your hairline. At removal, soften the bond with remover first and the smooth poly perimeter lifts away cleanly.
Can I customize the Dura Skin — color, length, or density?
Yes. Add-on services cover color matching and special color design, gray blended to your natural percentage, extra hair length, and density adjustments. For a made-to-measure build on this base, book a free 20-minute consultation and we'll spec it with you.
What is an injected hair system?
With injected ventilation, each strand is embedded directly into the thin-skin base instead of being knotted, so there are no knots at the roots. The result is an extremely natural, knotless finish where the hair appears to grow from the scalp.
How long does the Dura Skin last?
At 0.12 mm with bonded clear gauze reinforcement, the Dura Skin is the longest-wearing skin base in the range. Most wearers get several months from a unit and rotate 3–4 pieces a year. Thicker skin lasts longer; the trade-off is a slightly less ultra-thin look than a 0.03–0.06 mm base.
More systems
Compare another base.
Not sure yet
Choose with confidence.
Book a free 20-minute consult with a specialist, or design a system built to your exact spec.